 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| High Performance Metalworking Fluids and Products for Coolant Management |
|
|
|
|
| FOR MORE INFORMATION CLICK ON LINK TO ITW UNDER MANUFACTURERS. |
|
| Formulated with oils and emulsifiers, water-soluble oils combine the lubricity of cutting oils with the cooling ability and economy of water dilution. In addition to yielding finer finishes, water-soluble oils are also compatible with virtually all types of machinery and metals. They prevent rusting by providing a thin layer of oil film, and prevent rancidity and extend sump life through the use of biocides. |
| RUSTLICK WS-5050 ULTRACUT 250R ULTRACUT 255R RUSTLICK WS-500-A RUSTLICK WS-11 |
|
| Semi-synthetic machining and grinding fluids are synthetic-based coolants that typically contain some oil for added lubricity and corrosion protection. This makes them ideal for light-to-moderate machining and grinding applications. Semi-synthetic coolants also offer many of the same advantages as synthetics. |
| ULTRACUT 370R ULTRACUT 375R RUSTLICK SS-405L |
|
| Full synthetic coolants utilize a soluble combination of synthetic lubricants and do not contain any petroleum additives. Synthetics offer a number of outstanding advantages, including extended sump life and exceptional performance. In addition, synthetics offer superior cooling capabilities for extended tool life and reduced heat distortion. Synthetics also repel tramp oil and make its removal easy and less costly. |
| RUSTLICK Powerchip 2000 RUSTLICK SN-100A RUSTLICK VYTRON-N RUSTLICK Powersaw |
|
| RUSTLICK G-25-J RUSTLICK Carbide PowerGrind RUSTLICKG-1066D |
|
| RUSTLICK 606 RUSTLICK 631 RUSTLICK B KLEENZOL DY TRIADINE 20 NON-SILICON Defoamer |
|
| A synthetic transparent fluorescent green dielectric fluid formulated from base chemicals so highly refined and purified that additional additives are not necessary. EDM-500's cosmetic-grade chemical formulation virtually eliminates skin irritation during use. Resists thermal degradation from high-amperage applications (withstands up to 400 amps) and offers the highest known dielectric strength of any commercially available EDM fluid. EDM-500 can be used with all types of filters; including: paper cartridge, diatomaceous earth, and edge wafer disposable cartridges. |
| Designed to resist thermal degradation from high-amperage applications, EDM-250 is the longest lasting dielectric oil available - often lasting up to 3 years or more. It has low viscosity for excellent flushing and finishing, and prevents the clogging of diatomaceous earth and edge-wafer disposable cartridge filters. EDM-250 eliminates the smoke and odor associated with cheaper, less-refined oils. |
| A high-quality oil, EDM-30's low viscosity allows for fast settling and simplified purification. This yields higher quality finishes. EDM-30 eliminates smoke and odor and is designed for paper cartridge filtration up to 150 amps |
|
| DARACLEAN aqueous cleaners are all concentrated water-based liquids ranging from neutral to alkaline formulated to remove a broad spectrum of soils from multi-metals and non-metallic substrates encountered in today's industrial marketplace. DARACLEAN products are low-foaming, biodegradable, and recyclable, and can be used in spray, immersion, or ultrasonic applications. DARACLEAN is being used by thousands of companies throughout the world as a safe alternative to ozone depleting chlorofluorocarbons (CFC's) and volatile organic compounds (VOC's), which have come under strict legislation by various regulatory agencies. All DARACLEAN cleaners are formulated with health, safety, and the environment in mind. Designed as rejection chemistries, DARACLEAN cleaners can be filtered through conventional equipment for optimum performance and maximum tank life. |
| DARACLEAN 200 DARACLEAN 203 DARACLEAN 236 DARACLEAN 257 DARACLEAN 282GF |
| RUSTLICK Powerburn EDM-500 |
| RUSTLICK EDM-250 |
| RUSTLICK EDM-30 |
